Journal · Construction materials · Updated 22 November 2026
Materials and Structures
Read Materials and Structures articles on DeepDyve. No university library needed.
Materials and Structures covers construction materials and how they perform in structures, with recent papers on retrofitting masonry with textile-reinforced mortar, heat-resistant geopolymer mortars, aging of modified bitumen and mix design for 3D printed concrete. It’s an official journal of RILEM, published by Springer Nature. It was previously published as Matériaux et Constructions. A DeepDyve subscription lets you read it in full, alongside millions of articles from other journals licensed from publishers including Springer Nature.
Then $59 a month or $499 a year. A credit card is required; cancel during the trial and you won’t be charged. You read articles online; PDFs are sold separately.
Personal plans aren’t for business use. Reading for work? See Enterprise.
Materials and Structures at a glance
- Full title
- Materials and Structures
- Former title
- Matériaux et Constructions
- Abbreviation (NLM)
- Mater Struct
- Publisher
- Springer Nature
- Print ISSN
- 1359-5997
- Online ISSN (eISSN)
- 1871-6873
- Current title since
- 1992
- Access model
- Hybrid (36% free to read in 2026)
Ways to access Materials and Structures
36% of the articles Materials and Structures published from January 1 to November 20, 2026 are open access and free to read. For the rest, look for the authors’ manuscript, check a library, or read them on DeepDyve.
- Open access articles. 36% of Materials and Structures articles published from January 1 to November 20, 2026 carry a Creative Commons license, per Crossref, and are free to read. They’re marked “Open access” below.
- The authors’ accepted manuscript. For subscription articles, Springer Nature lets authors post their accepted manuscript on their own website as soon as it’s accepted, and in a repository such as PubMed Central 12 months after publication.
- Ask the authors. Authors can also share a free, read-only link to their published article through Springer Nature’s SharedIt, so it’s worth asking the authors directly.
- NIH-funded research. For papers accepted on or after July 1, 2025, the US National Institutes of Health requires the accepted manuscript in PubMed Central, free with no embargo from the official publication date.
- A library. Your university, hospital or public library may subscribe to Materials and Structures. Check its journal list and whether it offers remote access.
- DeepDyve. Read Materials and Structures articles online for $59 a month or $499 a year after a free first month. Articles marked LitStream below are in DeepDyve’s LitStream collection, which a subscription lets you read online. PDFs are sold separately, and availability varies by article.
Sources: Springer Nature self-archiving policy; NIH Public Access Policy; open access share from Crossref license data.
Impact factor and metrics
Materials and Structures’ 2025 Journal Impact Factor is 3.9, and its 5-year Impact Factor is 4.6.
3.9
Journal Impact Factor (2025)
4.6
5-year Impact Factor (2025)
8 days
Median time to first decision
1.1M
Downloads (2025)
Source: journal metrics on the Materials and Structures homepage (Springer Nature), checked November 22, 2026. Impact Factor from Clarivate Journal Citation Reports.
Recent Materials and Structures research worth reading
Published January to May 2026. Summaries describe what the authors report.
-
Textile-Reinforced Mortar (TRM) for retrofitting masonry structures: advantages, challenges and future potential
The authors review textile-reinforced mortar for retrofitting masonry, setting out its advantages over fibre-reinforced polymer systems, such as fire resistance, reversibility and compatibility with historic substrates, along with limits like the need for skilled application and long-term performance concerns.
Cascardi et al. · Materials and Structures, published online January 9, 2026 · DOI 10.1617/s11527-025-02891-8
-
High-temperature resilience of corundum-enhanced high strength geopolymer mortars: strength, microstructure, and thermal compatibility
Replacing sand with corundum aggregates in geopolymer mortars, the authors report that one mix reached 83 MPa at 1000 °C, a 302% improvement over the sand mix, while higher corundum content cut shrinkage by up to 40% and lowered porosity.
Al-Naghi et al. · Materials and Structures, published online February 9, 2026 · DOI 10.1617/s11527-026-02979-9
-
An innovative approach to developing low-carbon cementitious composites using TPMS-based geometric design
Casting two-phase composites of cement-based and geopolymer mortar in 3D-printed triply periodic minimal surface formworks, the authors report that placing the high-performance cement mortar outside and geopolymer in the core gave better mechanical performance and ductility than the reverse.
Nguyen-Van et al. · Materials and Structures, published online February 9, 2026 · DOI 10.1617/s11527-026-02984-y
-
Multi-scale characterization of styrene–butadiene–styrene modified bitumen during thermal aging
Studying styrene–butadiene–styrene modified bitumen under extended oven aging, the authors report a critical transition at approximately 160 min, with cross-linking of the polymer chains before it and dominant chain scission after it.
Xu et al. · Materials and Structures, published online January 19, 2026 · DOI 10.1617/s11527-026-02948-2
-
A data-driven review: mix design in 3D printable concrete
Standardizing 1149 mix designs for 3D printable concrete from more than 330 published sources, the authors use K-means clustering to identify five statistically distinct clusters that differ in cement loading, cement substitution, paste fraction and aggregate proportions.
Monkman et al. · Materials and Structures, published online May 22, 2026 · DOI 10.1617/s11527-026-03109-1
Related journals
Questions about Materials and Structures
How can I read Materials and Structures articles without a subscription?
36% of Materials and Structures articles published from January 1 to November 20, 2026 are open access and free to read. For subscription articles, Springer Nature lets authors post their accepted manuscript on their own website as soon as it’s accepted, and in a repository such as PubMed Central 12 months after publication. Your library may also subscribe. DeepDyve lets you read Materials and Structures articles online for $59 a month or $499 a year after a free first month.
What is the abbreviation for Materials and Structures?
Materials and Structures’ NLM (PubMed) abbreviation is Mater Struct.
What is the ISSN of Materials and Structures?
The print ISSN is 1359-5997 and the online ISSN is 1871-6873.
What is the impact factor of Materials and Structures?
Materials and Structures’ Journal Impact Factor is 3.9 (2025), and its 5-year Impact Factor is 4.6, according to Springer Nature’s published metrics.
Is Materials and Structures open access?
Materials and Structures is a hybrid journal: most articles are published under the subscription model, and authors can choose to publish open access. From January 1 to November 20, 2026, 158 of 441 Materials and Structures articles (36%) carry a Creative Commons license, per Crossref.
Materials and Structures articles on DeepDyve are licensed from Springer Nature. Journal facts as of 22 November 2026.
Start reading Materials and Structures today
One month free, then less than $2 a day. Materials and Structures, plus millions of articles from thousands of journals.





